Awesome Modern Agriculture Technology Equipment | Latest Modern Agriculture Tractor At Working
Types Of Angle Balers
Angle balers according to Bale sizes
Küçük small balers: Bale length 50-110 cm of dry grass, Bale
they are machines with a width of 30-60 cm and a height of 30-60 cm.Most in our country
these are the machines that are used and most common.To run these machines
A tractor with 60 HP is enough. According to the type of material they make Bale
although they vary, the weight of the bales they produce is up to 75 kilograms.
Büyük large balers: Bale length 150-250 cm of dry grass baled, Bale
machines with width 50-80 cm and height of Bale 50-80 cm. Rather
large-scale livestock enterprises and the transportation of excess dry grass
for these machines are preferred. At least 90 HP to operate these machines
a tractor is needed. Bale varies according to the type of material they make
the bales they produce together weigh up to 400 kilos.
Angle balers according to the tightness of the bales they produce
Alçak low pressure balers: the bales produced by these machines are made
although it varies according to the raw material of Bale between 8-25 kg
Yüksek high pressure balers: the bales produced by these machines are made
according to the raw material of Bale varies between 25-50 kg
Çok very high pressure balers: the bales these machines produce
although it varies according to the raw material of the Bale made between 50-100 kg
General characteristics of angle balers can be listed as follows:
Günümüzde large balers with corners next to other balers today
it is more preferred. Because the Bales made by the machines
moving and stacking to transport vehicle (tractor, truck etc.) install more
Uzunluğu length of Bale in these machines, which make Bale in the form of large rectangular prism,
It is between 1-2. 5 M and the height is between 0.3-0.7 m. Bale weights typical
250-400 kg for stalk, 300-450 kg for dry grass, 1.5 kg for silage
the length of m is 350-550 kg.
Yoğunluk Bale densities according to the harvested product (depending on its dry substance)
varies. For example, 200 kg/m3 for dry stalk, 400 kg/ m3 for silage
At least 60 HP tractor power is needed to operate these machines.
Bales made are connected from at least two places.